Get every last drop
Click here to download a printer friendly version of Tip-
Pg. 1 (290 KB)
Help with Downloading
All woodworkers often end up with two or
more partially-filled bottles of the same glue, resins or
other thick, "slow-moving" liquid.
Since consolidation is often the best way to be sure you have
enough space to do the tasks you have to accomplish - and
since some of these liquids can be quite costly -- it's important
that you get all of this "stuff" into a single container.
And…it's equally important that you do so without having to
physically stand there while one container's "stuff" slowly
oozes into another.
Here's the simple trick. Take two caps from two matching jugs
or bottles. Position them top-to-top and glue, rivet, bolt
or tape them together permanently.
Drill a hole (as large as possible) through the center of
the two attached caps. Attach one side to your lids to the
"receiver" bottle or jug and the other side to your inverted
Walk away and come back later when you're confident that the
"donor" bottle has drained its contents thoroughly into the
"receiver" bottle… without your having to stand by all day
long and watch ! h with the board's surfaces.